Product Introduction：

Tailings vacuum belt filter is a mining industrial equipment that achieves solid-liquid separation through vacuum suction and gravity. It is specially customized by our company for the tailings industry with high filtration requirements and low filter cake moisture content.

Working Principle:

Tailings slurry is evenly distributed onto a forward-moving filter cloth by the feeding device. Under the suction of a vacuum pump, the filtrate passes through the filter cloth and the filter belt's pores into a vacuum chamber, and then flows into a filtrate tank through a connecting pipe at the bottom of the vacuum chamber. The solid phase is trapped on the filter cloth, forming a filter cake. Because gravity and vacuum suction are in the same direction, larger particles settle below the filter cake, while smaller particles settle above it, forming a well-structured filter aid layer with low resistance and high filtration speed. The formed filter cake moves with the conveyor belt and is washed and dewatered multiple times before falling off at the filter cloth's turning point. Subsequently, the filter cloth and conveyor belt are separated by a drive roller and regenerated by high-pressure water washing. After being adjusted by a correction device, the filter cloth returns to the feeding end to begin a new operating cycle.

Our Advantages：

1. Large processing capacity

2. Continuous operation

3. Separate washing of filter cloth and tape, high efficiency

4. Low moisture content in filter cake

Applications：

Tailings vacuum belt filter are mainly used for tailings slurries such as gold tailings, manganese ore, and manganese oxide reduction acid leaching slurry.